View Full Version : Jeeps and Winter
TJMagoo
11-14-2002, 12:43 PM
So since I live in NE Ohio and winter is just around the corner, if not here already :x . A lot of us work and modify our jeeps now. So what does everyone plan on doing to their jeep this winter???
I'll go first :D I plan on line-x'ing my front and rear bumpers that are now stained from mud at Wellsville :* I think that is it for now but ya neva neva know! :g
1981CJ5
11-14-2002, 01:36 PM
storage baby I am putting my jeep in the garage and bringing out the 2wd neon
scrambler013
11-14-2002, 01:44 PM
My Jeep will be off the road till Dec first, I will be putting headers on her, Borla Cat-back stainless exhaust. Hopefully I will be putting the 2" suspesion lift on this winter. :) I will aslo be putting a better air intake on for more flow and horsepower :D I am also putting stainless steel hardware on. That includes windshield hinges and tailgate hinges, i already have the hood hinges and the rest of the hood hardware done.
'95 Wrangler YJ, 2" body lift, 31x10.5 Bridgestone Dueler M/T's, Still running that hard working 2.5L four banger.
TJMagoo
11-14-2002, 02:06 PM
storage baby I am putting my jeep in the garage and bringing out the 2wd neon
The 2wd neon?? In winter :shock: Good luck man ;) j/k
1981CJ5
11-14-2002, 02:11 PM
wouldn't want the jeep to get salt on it, scrambler what kind of intake are you putting on?
scrambler013
11-14-2002, 02:19 PM
1981CJ5 I am putting a Pacesetter Air F/X kit, or a K&N FIPK on from 4WD hardware. They list for the 4.0 6's but the way the YJ's are set up the kits should work on the 2.5.
Wind_Danzer
11-14-2002, 05:00 PM
Hopefully getting the belly up on by the end of winter. I have everything except for the AA shifter linkage, 1 set of lower arms and the HD DS (which will be measured for after the install).
RockHopper
11-15-2002, 06:06 PM
Regarding your air intake, I would seriously consider the new AEM air intake system, it just came out, and is in your 4WD catalog under new items...Just a thought and it is priced very closely to the K&N and Pacesetter system.
TJMagoo
11-15-2002, 06:47 PM
Regarding your air intake, I would seriously consider the new AEM air intake system, it just came out, and is in your 4WD catalog under new items...Just a thought and it is priced very closely to the K&N and Pacesetter system.
Have you used this kit before? How is it if you have?
moabe
11-22-2002, 09:04 AM
hmm. right now she is gettin her 8.8 installed... then im takeing alll the diamond plate off the corners and rockers to get line xxxxxxxed, then in jan she willl be gettin her new pewter paint with BENGAL stripes....oh, and the cable vacume replacement.....hope my burger king check willl cover it :D
moabe
11-22-2002, 09:05 AM
Regarding your air intake, I would seriously consider the new AEM air intake system, it just came out, and is in your 4WD catalog under new items...Just a thought and it is priced very closely to the K&N and Pacesetter system.
hmmm closely??? so its more huh......that aint close enough
TJMagoo
11-22-2002, 02:36 PM
hmm. right now she is gettin her 8.8 installed... then im takeing alll the diamond plate off the corners and rockers to get line xxxxxxxed, then in jan she willl be gettin her new pewter paint with BENGAL stripes....oh, and the cable vacume replacement.....hope my burger king check willl cover it :D
What kind of jeep do you have...besides saying a Wrangler. Is it a YJ or a TJ and what year.
moabe
11-25-2002, 11:33 AM
91 yj 6cyl
Sean Southern
11-25-2002, 07:01 PM
:D I guess up north because of the salt and sanding most of you store or work on your Jeeps?
Anyway a couple of quick tricks I did to my TJ and my YJ, I made my own air intake using a stock TJ air tube and attached a cone filter to the end works like a charm,you can use some flat stock sheet metal for a splash/ heat shield, and because the YJ and TJ injected models have the same TB diameter no special mods needed. :lol:
As far as storing my Jeep, they were made to wheel and in Texas wheelin's good ;) .
'00 TJ 4.0, homemade air intake,4" pro comp lift, 33" BFG M/T Borla cat back, 5 speed NV 3500
'94 YJ 2.5 same air intake, 4"Full-traction lift,5 speed,31" BFG M/T
tj2kbob
11-26-2002, 09:54 PM
Mine stays in the Garage unless I am going off-roading...I drive a company POS otherwise..I have no issue getting the company car covered with salt etc.. 8)
TJ-RUBI
11-27-2002, 08:29 PM
I want to go up 6", run Goodyear MT/R 315/75-16 on AR atlas 16/10. looks like I'll have to wait for early next year :x for a long arm kit. :USA:
TJ
I just run mine every weekend between Vermont and CT. PLENTY of sand and salt. I just hose off the under side anytime it goes above 32*.
Mods come when the driveway mud dries out in the spring.
deadpedal
12-18-2002, 12:21 AM
...I drive a company POS otherwise..I have no issue getting the company car covered with salt etc..
Ditto. :D
thejeepingoat
12-18-2002, 12:50 AM
im also from texas, i never go into storage, other than that i will be getting my engine in within the next couple of weeks, and helping my buddy with his yj (92)....
goat
LeadFoot
01-01-2003, 04:49 PM
91 yj 6cyl
The toole moabe is yet on another forum. Oh man. :shock:
Powered by vBulletin™ Version 4.0.1 Copyright © 2010 vBulletin Solutions, Inc. All rights reserved.