Vacume Line Help

[RedWrang]

I have an 87 with an inline 258 carburated 6cyl. I replaced the exhaust manifold gasket and intake gasket. All is back perfect except 2 vacume lines. Can someone please tell me where they go, its the line comming from the distributor where does it go. The other is if your looking at the engine from the front its on the left side of the carb about middle way and kinda at the bottom. What hose hooks to it. Any help will be greatly appreciated. Thanks

[Muspah]

I would go to a library and look at the chiltons vacuum diagram. Should clear it right up.


Muspah

[deadpedal]

I am guessing that one is the sol-vac line, the other is bugging me though, can't place it. Heck, I'll have to look it up to help if I can...

[jay89]

The hose coming from the vacuum advance on the dist. should be going to a teed line coming from a vacuum switch located on the firewall or passenger side fender and then to manifold vacuum which should be a port above the EGR valve. This port should have a thicker hose going to the brake booster.


this should be a vac diagram:
http://www.off-road.com/jeep/tech/258bbd/vacuhose.htm