Ring gear and Pinion teeth

[BLURUBI]

:USA: Is there anyone out there that can tell me how many teeth are on my ring gear and pinion grear for my new NVG241OR TRANSFER CASE that sports a 4:1 low-range ratio, DANA 44 AXLES, 4.10 rings-and-pinions, and air lockers built by Tochigi Fugi Sanjyo. I just recently bought a TJ Wrangler 2003 RUBICON and nobody seems to know this simple nontideous information. WHAT'S UP WITH THAT? Its almost as if its like some top secret info, "and if i tell you i must kill you kind of data". If someone can give me that information and back it up with proof of literature or journal, I would be extremely greatful. Thank you for your interest, concerns and replies.

[Joker®]

A Dana 44 should be 41 on the ring and 10 on the pinion. I know that a 4.09:1 is 45 on the ring and 11 on the pinion.

[TJ-RUBI]

hope your enjoying your RUBI as much as I. there is a nice article in 12/03 petersen's 4 wheel & off-road mag.you can probaly get the article @ 4wheeloffroad.com as well :D it shows the 241-231 side-side. :USA: TJ