Blupupher
02-04-2003, 08:50 PM
Q: How do I get the stickers off of my sun visors?
A: There are several answers to this. The fastest way does not remove them, just makes it so you don?t see it all the time. You remove the drivers? side visor from the rod (no tools needed, it just slides off with a little effort) and the passenger side sun visor. Then place the drivers side visor on the pass. side and place the pass. side on the drivers? side. This just puts the sticker facing up unless you are using the visor. Some have said they have stickers on both sides, so this won't work for you if that's the case.
To remove, you have to determine if it a sticker or a silkscreen type.
If it is just a sticker, use a hair drier to heat the sticker up and slowly peel the sticker off. It may leave a sticky residue, but that can be cleaned with an adhesive remover or something like WD-40.
If it is the silk-screened type, I can't really give a definite answer, I have not personally dealt with it. I have recived firsthand info that nail polish remover works well, just takes a while. Do not use straight acetone as it can damage the plastic visors.
Q: How do I get the stickers off my Jeep?
A: Take a hair drier and heat up the sticker and metal around it. After it is warm, use your finger nail, credit card or other plastic card and start at a corner of the sticker. Once the sticker starts to come off, grab the edge and pull slowly, keeping area warm with hair drier. Some residue may remain, but can be cleaned with alcohol, or WD-40. Apply a coat of wax when finished. Be aware that if the sticker has been on a long time, there may be some fading of the paint, and where you removed the sticker from may be darker.
A: There are several answers to this. The fastest way does not remove them, just makes it so you don?t see it all the time. You remove the drivers? side visor from the rod (no tools needed, it just slides off with a little effort) and the passenger side sun visor. Then place the drivers side visor on the pass. side and place the pass. side on the drivers? side. This just puts the sticker facing up unless you are using the visor. Some have said they have stickers on both sides, so this won't work for you if that's the case.
To remove, you have to determine if it a sticker or a silkscreen type.
If it is just a sticker, use a hair drier to heat the sticker up and slowly peel the sticker off. It may leave a sticky residue, but that can be cleaned with an adhesive remover or something like WD-40.
If it is the silk-screened type, I can't really give a definite answer, I have not personally dealt with it. I have recived firsthand info that nail polish remover works well, just takes a while. Do not use straight acetone as it can damage the plastic visors.
Q: How do I get the stickers off my Jeep?
A: Take a hair drier and heat up the sticker and metal around it. After it is warm, use your finger nail, credit card or other plastic card and start at a corner of the sticker. Once the sticker starts to come off, grab the edge and pull slowly, keeping area warm with hair drier. Some residue may remain, but can be cleaned with alcohol, or WD-40. Apply a coat of wax when finished. Be aware that if the sticker has been on a long time, there may be some fading of the paint, and where you removed the sticker from may be darker.