lift question

[Penguinizi]

i am currently installing a 3.5in 4WDH lift and my rear trackbar does not seem to want to reach the mounting point(w/ bracket installed)... any suggestions?

also my sway bar links are being a PIA to get off...i took the whole sway bar off and i have tugged and pulled and lubed from every direction i can think of...yet again... any suggestions?

[dave95jy]

well as far as the rear track bar goes just take it off and throw it away you dont need it. if you really want one you can get a relocation bracket or even a adjustable one but you really dont need it, i have been running with out it for a couple years now.

and for the sway bars you need a ball joint fork tool thing or just get a big hammer and beat them out. mine were a PIA also

[Penguinizi]

i did take the back track bar off and i dont seem to notice any bad control from it not being there...

as for the sway bars, i took the whole sway bar off for now seeing how i had to get my jeep out by sat night because i've been driving my sisters jeep and she came back sat night from vacation. in the next week or so i will prob get to them, but i dont notice any bad control from any of this...slight body roll but i suppose that could be because of all the lifts i have...its not exactly your average lifted jeep anymore :)

also, do they make longer 4wd shifters because w/ 3in body lift and transfer case drop now, its a ***** to shift, the boot on it is like almost flat because the shifter is so low...