The Backspasing question

[branjeep]

I decided to go with a 4 and 1/2 inch rusty's offroad suspension lift. Then I changed from 33's to 32/1150s on 15x10 inch rims for economical reasons...seeing as how gas is going up up and away...So my question is how much backspacing due I need for maximum articulation while allowing the tires to stick out on the sides.
thanks

[jdogg4]

well do you want them to stuff inside the wheel wells when flexing other wise thats going to cut back on your articulation/flex.

[branjeep]

I want them to stick out a little for the visual effect but then again I dont want to take out my fender flares when I flex...I could extend the bumpstops...so I guess I want to know what the ideal backspacing would be for my wheels considering manuverability and the visual effect?

[jdogg4]

this is what your looking at

-- Minor trimming, 15x8" Tech1 w/4.75 backspacing --

With 2" lift = 30x9.50 tires
With 3" lift = 30x9.50 to 31x10.50 tires
With 4.5" lift = 31x10.50 to 32x11.50 tires
With 6" lift = 33x12.50 tires

[branjeep]

Ok...the tire size is taken care of...Im doing 32's but im doing them on 15x10's so how much backspacing do i need
thanks

[jdogg4]

15x10's :shock: why so wide just for the look?
3 and a half maybe less so your getting 32's by what 11.50 12.50 what?