Announcement Announcement Module
No announcement yet.
Wheres the ground wire? Page Title Module
Move Remove Collapse
Conversation Detail Module
  • Filter
  • Time
  • Show
Clear All
new posts

  • Wheres the ground wire?

    Im putting my painless tail harness on now(didnt get to the oil gauge problem yet)and each side has four wires coming out for my tail lights. one for ground and the other 3 for light,turn signal, and backup. when i went to put my actually tail lights on i relized theres only 3 wires coming out of the light? so what do i do with my ground wire form the harness? is the tail light grounded by the bolts that go to the jeep? im confused here? Thanks for any info.

  • #2
    Yep, I would take a peek inside the light and see which bolt actually grounds the tail light assembly and run your ground wire to that bolt on each side.


    • #3
      Yeqa i just attached the ground wire to the back of the bolt, and now i have tail lights! Now on to my oil gauge.


      • #4
        Most CJ electrical problems can be traced back to one of the 3 following causes:
        1. Grounding
        2. Grounding
        3. Grounding