Announcement Announcement Module
No announcement yet.
Found El Cheapo D300 Yokes Page Title Module
Move Remove Collapse
Conversation Detail Module
  • Filter
  • Time
  • Show
Clear All
new posts

  • Found El Cheapo D300 Yokes

    I installed a D300 into my YJ. My D300 has those really crappy strap style yokes. I wanted U-Bolt style yokes but I didn't have an extra $50 X2 laying around. I had a bunch of D44 yokes laying around so I took a look. I found out that D44 yokes are a perfect fit. I had to take off the D44 yoke's dust shield but went right on. I even mesured the seal contact diameter, spline contact and everything is the exact same except for the dust shield on the yoke. But a flat head screw driver and 10 seconds pulled it off.

    So now I have 1310 U-Bolt style yokes for Free. If I want to upgrade to 1330 joints later then I'll just grab a yoke off of a F250 D44.

    So Dana must of did some parts sharing. I didn't know if you guys new about this so I decided to post it. Probably grab 'em at the junkyard for really cheap.

  • #2
    Also some Dana 20 T-cases have yokes that will fit the Dana-300. That's what I did when I put in my dana 300. Not all will fit though, some only have 10 splines.

    You would need the one on the left