Announcement Announcement Module
Collapse
No announcement yet.
SOA front spring plates Page Title Module
Move Remove Collapse
X
Conversation Detail Module
Collapse
  • Filter
  • Time
  • Show
Clear All
new posts

  • SOA front spring plates

    Does anyone make spring plates for a SOA? If I use the factory ones the shock mounts backward. Or do I have to drill out the factory ones to fit the u-bolts?

  • #2
    When I went SOA I made new shock mounts for the back and welded them to the old spring perch, they work great.

    On the front, my shocks mount to the axle, not the spring plate, so I had no problems. Maybe you should try switching sides when you flip the spring plates, that should put the shock mount on the correct side.

    Comment


    • #3
      I relocated my shock mounts also, but I used rear springs all around. I have seen people make there own plates out of 1/4-3/8" steel. Just need to drill some holes.

      Comment

      Working...
      X