Announcement Announcement Module
Collapse
No announcement yet.
Gauge Removal?? Page Title Module
Move Remove Collapse
X
Conversation Detail Module
Collapse
  • Filter
  • Time
  • Show
Clear All
new posts

  • Gauge Removal??

    I got a 82 5 and I would like to sand down and repaint the dash over lay... I can't figure out how to remove the gauges?? Can anyone help me out.. Thanks....

  • #2
    The speedo has 4 nuts on the back and goes out the back of the dash. THe oil and volt meter have two nuts on the back on a clamp that hold them in place. THese come out the front.

    Comment


    • #3
      Thanks

      Ok... Got that so far.. What about the lights... And the push pins for the heater and fan....Thanks....

      Comment


      • #4
        Tabs

        The indicator lights have little tabs on them top and bottom that you need to press inward. You will probably break the lights because the plastic is old and brittle so just go ahead and order a new set from 4WD.com.

        The knobs all seem to come off differently.

        The light switch comes off when you push a button on the switch that releases the entire stem and the fan and vent knobs have a tension clip just behind the knob but before the dash that has to be compressed while pulling out on the knob.

        Sorry, no pics of thie one but I have a pick of the tabs.

        D

        Last edited by Big D; 11-09-2008, 11:25 AM.

        Comment

        Working...
        X