Announcement Announcement Module
Collapse
No announcement yet.
Need advice on POR 15 prep Page Title Module
Move Remove Collapse
X
Conversation Detail Module
Collapse
  • Filter
  • Time
  • Show
Clear All
new posts

  • Need advice on POR 15 prep

    I've degreased, power washed, scrubbed, and repeated several times to get the 20+ years of grease off of the frame and undercarriage. I got the POR 15 to put on it all and I've ordered the POR 15 Metal Ready for a final cleaning. Is there anything else I need to know or do before I put on the POR 15? Under all the grease I found some rivets, rust and small holes. No big deal though. It was pretty solid all in all. Thanks in advance for any advice.

  • #2
    marine clean, then metal ready, then por 15, then top coat areas exposed to light.

    Comment


    • #3
      Thanks, Fubar, I would have missed the Marine Clean step. That wouldn't have been good.

      Comment


      • #4
        apparantly from what ive heard is to try to get as much rust as possible since the stuff sticks better to rust than bare metal........

        Comment

        Working...
        X