Announcement Announcement Module
Collapse
No announcement yet.
flex plate question Page Title Module
Move Remove Collapse
X
Conversation Detail Module
Collapse
  • Filter
  • Time
  • Show
Clear All
new posts

  • flex plate question

    howz it, i was wondering if anyone knew about flexplates. swaping in the 727 t/f, does this look like the proper instalation of the plate. 2 nd question, i put the starter up to where it goes, the gear that comes out of the starter is 3/4". from the dust shield to the face of the flexplate is about 7/8". is the gear supposed to rest in the teeth of the flexplate, i notieced the gear on the starter plunges in and out. it comes out more as you turn it. thanks in advance. http://i88.photobucket.com/albums/k1...4/DSC01741.jpg http://i88.photobucket.com/albums/k1...4/DSC01738.jpg http://i88.photobucket.com/albums/k1...4/DSC01734.jpg

  • #2
    I say that looks about right just make sure your bolts dont stick to far out the back of the crank and hit the spacer plate and make sure your converter does not pull to far front to disengage the pump in the tranny

    Comment

    Working...
    X