Announcement Announcement Module
No announcement yet.
T-5 Insulator Page Title Module
Move Remove Collapse
Conversation Detail Module
  • Filter
  • Time
  • Show
Clear All
new posts

  • T-5 Insulator

    I finally broke down and ordered the shifter insulator for my T-5, got tired of the floppy shifter and was too cheap to order a whole new shifter. What I need to know is does the insulator go between the shifter handle and the clip or between the clip and the nub that sticks out of the trans?

  • #2
    On my T-4, which I believe has the same stick setup, The insulator went between the tranny nub and spring clip. The slop in mine was the result of a crack in the square tube, at the end of the stick. It was hard to see at first becuase of the flaking paint. I welded it back up and haven't had any slop yet. Part of my springclip was broken and missing, I assume one of th P.O.'s replaced the insulator. Hope this helps.