Announcement Announcement Module
Collapse
No announcement yet.
Wide Tracks Page Title Module
Move Remove Collapse
X
Conversation Detail Module
Collapse
  • Filter
  • Time
  • Show
Clear All
new posts

  • Wide Tracks

    How much wider are wide track axles than standard Dana 44 and Dana 30's??

    Thanks

    High5

  • #2
    Approx 5" hub to hub

    Comment


    • #3
      Widetracks still have the same spring mount width right?? Or would they need to be moved in order to be put on a 75

      Comment


      • #4
        Mounts are wider too!

        Originally posted by High5
        Widetracks still have the same spring mount width right?? Or would they need to be moved in order to be put on a 75
        Heh they are wider too...

        Comment


        • #5
          I still may do it as I wouldn't mind having the extra width.

          Comment


          • #6
            As always the wider axle always helps.

            Originally posted by High5
            I still may do it as I wouldn't mind having the extra width.
            Good luck HMR-RSQ

            Comment


            • #7
              To be used an a 1975 they would require moving spring pads on housing on rear axle only. I think the front would stay in same position. On 1976 thru 1986 the frame widths are all the same. On thing that does change is that the wide track axles mount front shock on housing tabs instead of the spring plate. This also requires a taller frame mount be used or you will have almost no travel due to short shock length.Another cure for this issue is to remove the lower shock mount tabs and run standard pre widetrack shock system.

              Comment

              Working...
              X