Announcement Announcement Module
Collapse
No announcement yet.
Suspension Help Page Title Module
Move Remove Collapse
X
Conversation Detail Module
Collapse
  • Filter
  • Time
  • Show
Clear All
new posts

  • Suspension Help

    When I rolled my cj last summer The front axle slid back off of a pin that holds everything in place. Does anyone have a name for this pin or know where i could get another one. It seems to just hold everything in place. Thanks for all of your help. Getting ready to start the rebuild. Estimated return for the summer rollover is spring 07.
    T

  • #2
    try a shop that makes springs they should have them

    Comment


    • #3
      The correct name is spring centering pin. They usually come in 5/16" or 3/8"
      diameters on Jeep springs. They are usually 4-6" long and you cut off what you don/t need. If you cannot find them local we stock them in both sizes.

      Comment


      • #4
        they should have them at any auto parts store ... I bought for a trailer a few months ago .... they usually have them behind the counter

        Comment


        • #5
          Just a safty note from your ole Uncle Penguin....
          Make sure you clamp your spring togeather before you unbolt the old one....

          Comment

          Working...
          X