Announcement Announcement Module
No announcement yet.
Front Bumper Page Title Module
Move Remove Collapse
Conversation Detail Module
  • Filter
  • Time
  • Show
Clear All
new posts

  • Front Bumper

    I have a 1984 CJ 7 and I am attempting to install a new push bumper on the front. It was made for a CJ 7 so I know is fits. My question is: Is there an easy way to get a tool (9/16) wrench or socket or something to take the original bumper off? The nuts are inside the angle iron and I can't get any leverage on the nuts to break them free.

  • #2
    The best tool is a side angle grinder. There is no easy way to get a wrench in there. Cut them off if you can. When putting a new one on, put the driverside on first and then the passingers side.