Announcement Announcement Module
Collapse
No announcement yet.
steering upgrade Page Title Module
Move Remove Collapse
X
Conversation Detail Module
Collapse
  • Filter
  • Time
  • Show
Clear All
new posts

  • steering upgrade

    I have a 74 cj5 with manul steering. I want to put in a tilt colum and a power steering box. Besides a CJ what other vehicles can get the parts form?

  • #2
    http://cjford.stormloader.com/Jeep/jeepsteer1.htm

    Check out what this guy did. It's an option.

    Comment


    • #3
      I used a GM standard ps pump, flaming river column, steering shaft, CJ 7 steering box and pitman arm with a wagoneer mounting plate. Also replaced the cj tie rod with one from a TJ (believe it?). We also had to shorten the drag link to work with the new pitman arm and ps bos. System works great, but we had to box the forward part of the frame and add a steering box strut that ties the box to the opposite of the frame. The original setup flexed back and forth when the ps was installed. Hoses were custom made with a swivel joint on the return side for fit. Other than fuel lines to relocate and headers to miss, it was very straightforward.

      JK

      Comment


      • #4
        Originally posted by willness33
        http://cjford.stormloader.com/Jeep/jeepsteer1.htm

        Check out what this guy did. It's an option.
        I can not pull up that page, could you just give me a overview of what he did? thank you

        Comment

        Working...
        X