Announcement Announcement Module
Collapse
No announcement yet.
transfer case too low Page Title Module
Move Remove Collapse
X
Conversation Detail Module
Collapse
  • Filter
  • Time
  • Show
Clear All
new posts

  • transfer case too low

    can anybody please tell me where i can find a kit to clock my transfer case, i know this has been talked about before,thank you for any help

  • #2
    which transfer case do you have?

    Advanced Adapters sell them for the Dana 300 and probably others too.

    Comment


    • #3
      Go Here: For a D-300 - http://www.cjoffroad.com/D300ring.asp

      Go here for the write up:
      http://www.cjoffroad.com/forums/topic.asp?TOPIC_ID=396
      Last edited by Rollbar; 04-24-2005, 11:40 PM.

      Comment


      • #4
        thanks guys, i do have the 300

        Comment


        • #5
          http://www.jeepxtremes.com

          has a D300 clocking ring

          Comment


          • #6
            mine rides low to

            by the way im kinda new to this what does clocking mean, and i picked up a new trans bushings but dont know if it will keep the transfer case of the crossmember plate.

            Comment


            • #7
              has to do with rotating your transfer case. in the stock position the bottom end of the dana 300 sticks down kinda low. go to advance adapters and you can see pictures that may help explain it more.

              Comment


              • #8
                thanks for the info may plan it for later but for now i have to many other things to do. that is a cool idea.

                Comment

                Working...
                X