Announcement Announcement Module
No announcement yet.
locking hub problem Page Title Module
Move Remove Collapse
Conversation Detail Module
  • Filter
  • Time
  • Show
Clear All
new posts

  • locking hub problem

    I have a Warn locking hub on my approx 76 cj5. When I took it apart the needle bearings were going different directions. I cleaned it up and put bearings back in and there looks to be a few missing. Does any one know where to find some? Wreckers not successful yet and Warn doesn't sell any internal parts when parts store called them.
    Also when grabbing top and btm. of tire and wiggling I get movement. Book I have says this is a ball joint prob. Any chance wheel bearing retaining nut too loose could cause this. Didn't seem too tight when I took it off. If it is the ball joint how hard is that job and how soon do I have to do it.