Announcement Announcement Module
Collapse
No announcement yet.
Seatbelt help Page Title Module
Move Remove Collapse
X
Conversation Detail Module
Collapse
  • Filter
  • Time
  • Show
Clear All
new posts

  • Seatbelt help

    I am wrapping up my 85 CJ-7 restore and need some advise on seatbelts.

    The pillars where the factory seatbelt retractor mounts to was rusted out on one side and the other side the bolt broke off inside. I cut out the pillar on the rusted side and welded in new steet but forgot to weld the mounting inside for the factory retractors. I ground the broken nut side flush and filled the holes. All other mounting locations for my factory seatbelts are in great shape.

    So here is what I was thinking.

    1) Have a machinest down the road fixed what I messed up and install the factory stuff.

    or

    2) Buy these and use the 3 factory locations that are in good condition.

  • #2
    I just realized I can't mount the top harness point to the factoiry rollbar location so #2 doesnt appear like it will work

    Any other ideas?

    Comment


    • #3
      weld in a vertical bar behind the front seats and put 3-point harnesses in there, much much safer and the back seat is still useable w/ the bar

      Comment

      Working...
      X