Announcement Announcement Module
No announcement yet.
trans fluid change Page Title Module
Move Remove Collapse
Conversation Detail Module
  • Filter
  • Time
  • Show
Clear All
new posts

  • trans fluid change

    Hi all,
    I was reading the threads on trans fluid change,and was off to change over to sycromesh. Problem I have is, drain and fill plugs look like 3/8 square drive, but my 3/8 doesn't fit. Other threads say its a 15/16 socket,but the 15/16 I see are on the transfer case. Am I missing something? Any help is appreciated.

    89 YJ 4.2 5 spd
    Last edited by Kadien; 03-12-2006, 09:01 AM.

  • #2
    I have an AX15 trans and the drain/fill plugs are the same as my T-case.