Announcement Announcement Module
Collapse
No announcement yet.
Really Dumb Question (BL) Page Title Module
Move Remove Collapse
X
Conversation Detail Module
Collapse
  • Filter
  • Time
  • Show
Clear All
new posts

  • Really Dumb Question (BL)

    I’m adding a 1” body lift to the jeep since at full flex I’m still rubbing a little with the 35’s even with a RE 4” lift & ½” M.O.R.E Shackle lift. I’m sure I can find this in my Chilton manual but I’m at work and am hoping to put the body lift on tonight (since it’s my DD). So how do I get the mounts out that are under the front grill? Here’s some pics.


    It looks like this goes here

    http://img.photobucket.com/albums/v2...es/jeep005.jpg

    But how does the stock one come out?

    http://img.photobucket.com/albums/v2...es/jeep008.jpg

  • #2
    those mounts are rubber. they bolt into the bottom of the grill piece and just sit on the top of the frame. So when you are lifting it unbolt the grill (in the center) and raise it up.

    Comment


    • #3
      Thanks for the info, I just finished it up. It took about 2 hours... I feel pretty good about that since it was my first time and everything was all rusted up. I only had one nut spin so I welded a nut on to a piece of flat stock and welded it back on. So far no tire rub!

      Comment


      • #4
        Glad it went well Dave. You should have called me, I would have given you a hand!

        Comment


        • #5
          Originally posted by LoTGoD
          Glad it went well Dave. You should have called me, I would have given you a hand!
          Thanks for the offer Aaron, I figured you had enough to worry about with your tranny, plus I may need to help with the MML I got planned

          Comment

          Working...
          X