I just installed Surper Lift leaf springs in my 92. Installiaton went as expected had to muscle them a bit to get the pin on the spring into the hole in the axel. One thing I did not expect was the plate under the spring that the U bolts go thru has a hole in the center of it that the nut on the underside of the spring goes thru. The nut on the new springs is bigger than the nut on the old ones thus the hole was to small. I had to drill it out this was not mentioned in the instructions. I happen to have a drill press and the correct bits to do this but if I did not I would have been a pain. A round file will not get it you will be fileing all day........FYI
Announcement Announcement Module
No announcement yet.
YJ Lift Tip Page Title Module
Move Remove Collapse