View Profile
View Forum Posts
Private Message
Reply With QuoteCan you buy a right angle at the auto parts store to tighten the curve up? A picture might help.
Jeep Parts & Accessories |
Jeep Tops |
Jeep Bumpers |
Jeep Doors |
Jeep Lift Kits |
Jeep Tires |
Jeep Rims |
Jeep Winches |
Jeep Tire Covers |
Jeep Seats |
Jeep Clothing |
Jeep Gifts
hey gang i purchased a hei dist. from our host to replace the original stock dist.on my 76 cj with a 304 v8. the issue i am having is the vacuum advanced connection ends up near the fan and the hose will be hit. my question is can i move the plug wires on the cap one spot over and then the vacuum fiting will be facing another direction away from the fan blade.
Can you buy a right angle at the auto parts store to tighten the curve up? A picture might help.
81 CJ7 258, NV4500, Dana 300, Detroit Locker in the front, 4" Skyjacker spring lift, 1" body lift, Warn M8000 Multi Mount winch, KC Lights, etc
Turn the distributor so it doesn't interfere with anything and then set the shaft and rotor to where it needs to be.
88YJ, newer 4.0 and AX15, winch, 6" lift sagging to about three, 33x12.5x15 mud rovers
I'm not stupid, Just confused.
Send it back immediatley. Do not pass go, do not collect any money as instead you will be spending much money and time to fix what that pos destroys. I will update in my "POW" thread in a bit.
1976 CJ-5 304, T-150, Dana 20, model 20 with Mosers and Lock Right, D30, 3.54, 2.5" Rancho, 32x11.5x15 BFG MTKM, HEI, Smittybilt XRC8 winch, Painless Wiring Harness, front disc brake conversion, power steering conversion
be careful to check that the gears are in perfect alignment or your gonna tear up the cam gear. Run it for five minutes and pull the dizzy to check it, if you don't see a nice pretty pattern don't put it back in.
'85 CJ-7, 4.2L, MC 2100, TFI, T-176, Dana 300, Ford 9 inch, Dana 30, 35 inch budget mudders, 4 inch spring lift
Two roads diverged in a wood, and I -
Driving a Jeep -
I took the one less traveled by,
And that is where all the dents came from.
There are currently 1 users browsing this thread. (0 members and 1 guests)
